Walton Primo D1 install driver. 2.Open Flash Tool Free Download Here

1. install driver.
2.Open Flash Tool

3.Open  Download Agent and select MTK_AllinOne_DA

4. Open scatter_loading and select SW---> WBWS212WA_0301_T5067 MT6577_Android_scatter_emmc

5. Click  Firmware-> Upgrade and connect USB with mobile (without battery)
6. Insert Battery then start downloading ..
7.When it shows Firmware Upgrade  with green colour, the installation is completed.


somadhantelecom@yahoo.com
                                          Download Here

How to Flash

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed).

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.