Winstar W30 Full Flash File Tested Here 100%

 

 

contacts number
+8801725000669

somadhantelecom@yahoo.com

Download Here 

 

    GND Pin:20, 
    Signal Pin:21, 22, 23, 24, 
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
    USB Pin Out: D+:22  D-:23
    HardWare:VID:17_82 PID:4D_00 
    This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM20
    Driver Name->>>SPRD U2S Diag
>>> Connecting Mobile...
    Mobile Connection Success...
    Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
    Project ID :Spreadtrum Boot Block version 1.2
>>> Mobile Info
    Flash ID:0x00C8006000000000
    Flash Name:SF_GD25LQ128
    Flash Size:0x01000000  -> 16M
    CPU Name:6531
     Baud Rate is Switched To:921600
>>> Reading Flash...
    Reality Flash Size£º0x01000000  -> 16M
    All Done..

How to Flash

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed).

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.