--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM7
Selected model: H810
Reading info...
Model ID: LGV32
IMEI: 359060-06-054596-0
Android version: 5.1
Battery level: 10%
Mode: Normal
Firmware compiled date: Apr 23 2015
Firmware compiled time: 18:00:00
Firmware released date: Jun 23 2015
Firmware released time: 16:36:49
SW Version: MPSS.BO.2.5.c3-00070-M8992FAAAANAZM-1
IMEI: 359060-06-054596-0
Bluetooth address: 00:00:00:00:00:00
SPC: 000000
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM7
Selected model: H810
Reading info...
Model ID: LGV32
IMEI: 359060-06-054596-0
Android version: 5.1
Battery level: 10%
Mode: Normal
Firmware compiled date: Apr 23 2015
Firmware compiled time: 18:00:00
Firmware released date: Jun 23 2015
Firmware released time: 16:36:49
SW Version: MPSS.BO.2.5.c3-00070-M8992FAAAANAZM-1
IMEI: 359060-06-054596-0
Bluetooth address: 00:00:00:00:00:00
SPC: 000000
Unlocking...
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "H810_359060060545960_04-01-2016_23-27-07.qcn"
Switching to Download mode...Failed!
Please perform the following steps:
1. Disconnect cable
2. Put phone into download mode manually (Power phone OFF, press and
hold "Vol+" button and connect the cable)
3. Connect cable and press "Ok" button.
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "H810_359060060545960_04-01-2016_23-30-38.SEC"
Writing security area...OK
Switching to Normal mode...
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Please perform the following steps:
1. Disconnect cable
2. Put phone into Normal mode manually
3. Press "Ok" button
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Diagnostics ports are enbled!
Switching to Serial Port...
Found model LGV32HL-* ÿd at port COM320
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing QCN done!
Phone successfully unlocked!
Please, reboot the phone manually.
0 comments:
Post a Comment